Dataman 848 - Manual (Page 13)

DATAMAN 848 MANUAL
Introduction 13
protects your wallet by preventing expensive chip damage
caused by operator error.
Auto-sensing and self-programming
The DATAMAN-848 has implemented patented technology
to meet mass-production requirements. When a chip fails
the device insertion check, the DATAMAN-848 waits for an
operator adjustable time. If the operator fails to correct the
improper insertion within the selected time period, the
socket with the improper insertion is shutdown and the
other chips are automatically programmed.
Independent module design
The DATAMAN-848 is designed to achieve a minimum of
down time. Its 8 sockets are divided into 4 identical
modules having two sockets each. Each module is
independent of the other three modules. If one module
fails, the customer can continue to operate the other three
modules without sacrificing the turnaround time to repair.
Extra modules are available to customers in spare kits.
Project file "Save and Load"
You can save the program configuration project file that
contains the device selection, the buffer data and all of the
program setup options. This file can be recalled at any
time for future use without having to go through the setup
procedure again. This allows you to pass your design file
to the production department without mistakes. You can
also read the data from a device into the buffer from any of
the 8 sockets, according to your specification.
Variable VCC with one or two-pass verification
The DATAMAN-848 allows users to select the verification
voltage after chip programming is completed, e.g., VCC +/-
5%, VCC +/- 10%. VCC can range from 2 V to 7.5 V.
Verification ensures that the chips have been properly
programmed, with no data retention problems.