Dataman 848 - Manual (Page 36)

DATAMAN 848 MANUAL
36 Operation
the data differs. It will also abort the process when this
happens.
Figure 4-5 Device verification screen
Memory Protect
Menu Device | Memory Protect
Hot-key CTRL-P
This function is a device-specific command; it appears on
the main menu only after chips having this capability are
selected. The function must be configured before use.
When properly configured, it can be selected and will
automatically set memory protection on the chips
immediately after they have been programmed.
Erasing a device
Menu Device | Erase
Hot-key CTRL-E
This function is a device-specific command; it appears on
the main menu only after electronically erasable chips