Dataman 848 - Manual (Page 28)

DATAMAN 848 MANUAL
28 Operation
To Buffer Address
If the data read is to be copied into a specific area of the
buffer, fill in the starting address here.
Size
This box contains the buffer size. By default it is the same
size as the device size. If you want to download a file into
memory that is bigger than the active device, insert the
size here (or in Options | Operation Options).
Clear Buffer Options
Four options are available during memory buffer data
loading. The default option is to clear the buffer to its blank
state prior to data loading.
Disable
This option leaves the original buffer data unchanged, but
then overwrites it with the contents of the newly loaded file.
Blank state
This option clears the buffer to the device blank state
(using command 00 or FF, depending on device selection),
then overwrites the buffer during file loading.
0x00
First clears the buffer of its contents using command 00,
then overwrites the buffer with the new file contents
0xFF
First clears the buffer of its contents using command FF,
then overwrites the buffer with the new file contents.
Change Directory
Menu File | Change Directory
Hot-key None