Dataman 848 - Manual (Page 27)

DATAMAN 848 MANUAL
Operation 27
Select a file to load using the mouse, or type the filename
in the box provided. You can also type in a file spec. (e.g.
*.hex) at the Name prompt. This will display all the files of
the specified type, and you can then select the required file
to load.
ViewText
Certain file types contain header information. Click on this
box to see this information. This will display information
similar to the following:
ABEL(tm) 3.00a FutureNet Div, Data I/O Corp. JEDEC
file for: P16V8R
Created on: 15-Sep-94 04:17 PM
PROM8908 pin configuration Ver 3.0
ADVANTECH CO. LTD. 4 NOV 1991*
QP20* QF2194*
L0000
01101111111111111111111111111111
00000000000000000000000000000000
Auto Format Detected
The software automatically detects the format of the file
that is to be loaded. If the desired format of the file differs
from the format detected, select the correct file format.
From File Mode
This option indicates which bytes must be read in the input
file. Select the required format.
To Buffer Mode
This option indicates where the byte previously read is to
be written. This enables you to 'build' the memory buffer
from several files.
From File Address
If only a selected range is to be read from the input file, fill
in the address that will contain the first byte into this box,
and the size of the buffer to be read in Size.