Dan Dugan Sound Design D-3 - Manual (Page 6)

Dugan Model D-3 User Guide Quickstart
6
Q-3 Side and rear panel connections for Control Panel
3. If there are multiple Processors, make sure one Processor is set to Master mode; the other
Processor(s) must be set to Slave mode. Position the cursor on
MASTER
or
SLAVE
using
the left and right buttons on the front panel, then press the
ENTER
button to toggle the setting.
Q-4 Changing Processor from Master to Slave
4. Using insert cables wired appropriately for your console, connect each channel of the
Processor into the insert loop (send and return) of each mic input channel.
Q-5 Audio connections