Dan Dugan Sound Design D-3 - Manual (Page 46)

Dugan Model D-3 User Guide Remote Control
46
Channel Override
Use this command to query and set a given channel’s
override
status. For example:
Channel Weight
This read-only command reports the channel
auto mix weight
for the given channel in
multiples of 0.01 dB. For example:
You may not change the channel weight from the serial link since the weight must fol-
low the knob position on the control head.
Factory Preset
This command, like the
RESET
command on the LCD front panel, resets the unit to its
factory presets. For example:
Example ID Command Channel Value
Sent 15 CO 2 15 Channel Override (query) 2
Reply 15 CO 2, 0 15 Channel Mode (response) 2 0 = Channel Override disabled
Example ID Command Channel Value
Sent 15 CO 2, 0 15 Channel Override (set) 2 0= Disable Channel Override
Reply 15 CO 2, 0 15 Channel Mode (response) 2 0 = Channel Override disabled
Example ID Command Channel Value
Sent 15 CW 2 15 auto mix weight (query) 2
Reply 15 CW 2, -300 15 auto mix weight (response) 2 -300 = -3.00 dB
Example ID Command Channel Value
Sent 15 FP 15 reset to factory presets
Reply 15 FP ok 15 response ok = reset accomplished