Dan Dugan Sound Design D-3 - Manual (Page 5)

Dugan Model D-3 User Guide
5
Quickstart
This section provides step-by-step instructions to help you get started quickly. It includes information
to connect and install the D-3, make initial settings, and link Processors. See Conventions on page
13 before proceeding.
Connections
Q-1 Rear panel
1. Connect the DC power supply (provided) to the Processor.
2. Connect the Processor to the Control Panel with the five-pin XLR cable (provided).
Q-2 Power and Control Panel connections
The Control Panel may be connected on its rear panel if the unit will be operated in an up-
right position, or on the left side if the unit will be laid on its back.