Important safety instructions and warnings, Standards compliance, Safety instructions – Dan Dugan Sound Design D-3 User Manual
Page 2

Important Safety Instructions and Warnings
The Model D-3’s circuitry is made in the U.S.A. and meets applicable national safety
standards.
Standards Compliance
The third-party power supply provided with this product has been certified to comply
with UL and CE.
Safety Instructions
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
WARNING! To reduce the risk of fire or electric shock, do not expose this ap-
paratus to rain or moisture.
7.
Clean only with dry cloth.
8.
Do not block any ventilation openings. Install in accordance with the manufac-
turer’s instructions.
9.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
10. Warning! This is a Class 1 device. The electrical safety design of Class 1 de-
vices depends on proper grounding. To maintain electrical safety ensure that a
grounded mains lead is used and that it is properly connected to a grounded
mains wall outlet.
11. Do not defeat the safety purpose of the polarized or grounding-type plug. A po-
larized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
12. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
13. Only use attachments/accessories specified by the manufacturer.
14. Unplug this apparatus during lightning storms or when unused for long periods
of time.