Dan Dugan Sound Design D-3 - Manual (Page 48)

Dugan Model D-3 User Guide Remote Control
48
Master or Slave Mode
Enable master or slave mode for the Processor. For example:
Dugan Music or Speech System
Use this command to query or set the given channel to Dugan Music or Speech System.
For example:
Example ID Command Channel Value
Sent 15 MM 15 master or slave mode (query)
Reply 15 MM 1 15
master or slave mode
(response)
1 = master mode
Example ID Command Channel Value
Sent 15 MM 0 15 slave mode (set)
Reply 15 MM 0 15 slave mode (response) 0 = slave mode
Example ID Command Channel Value
Sent 15 MR 2 15 music system (query) 2
Reply 15 MR 2, 1 15 music system (response) 2 1 = music system enabled
Example ID Command Channel Value
Sent 15 MR 2, 0 15 speech system (set) 2
Reply 15 MR 2, 0 15 speech system (response) 2 0 = speech system enabled