The top pane – Dan Dugan Sound Design E-1 User Manual
Page 30
Dugan Models E-1 and E-1A User Guide
30
Launch the Dugan-Control-Panel-vxxx.jar. If this file is not available and you have
an Internet connection, you can obtain the latest version from:
- OR -
If you do not have an Internet connection, you can use the version of the Dugan
Control Panel stored inside the unit’s firmware. See Using the Internally Stored Dugan
Control Panel on page 25.
The Dugan Control Panel has three panes. The controls displayed in these panes de-
pend on which Dugan device is selected in the Top Pane.
The Dugan Control Panel is divided into three panes:
The Top Pane
The Top Pane displays all connected Dugan units. The active unit is enclosed by a
yellow rectangle. Click on another unit to select it and deselect the previous unit.
Figure 4-2 Top Pane
If all connected units do not appear in the top pane, see Establishing Network Con-
nections. To display a unit’s IP address, hover the mouse over the unit’s name.
To display a unit’s IP address, touch and hold the unit’s name.
Top Pane
icons for all connected Dugan units
Channel Pane
man, auto, mute, preset, override, group, weight, bypass, and channel name controls
Master Pane
OVERRIDE, PRESET, MUTE, meters, system, and reset controls
iPad