Dan Dugan Sound Design E-1 - Manual (Page 21)

Dugan Models E-1 and E-1A User Guide Installation and Configuration
21
Network Reset
Hold down the channel 1 mute button to set these parameters to their default values:
*xx = last two digits of serial number, unless 00, then use 100
DHCP On
Turning DHCP on requests that the network assign an IP number to the Model E-1A,
if the network has that capability. To turn DHCP on, hold the channel 2
bypass but-
ton down.
8- or 16-Channel Mode
These commands only work if the unit is in digital mode. Move the ANALOG–DIGITAL
switch to the DIGITAL (down) position.
Hold down the channel 4 bypass button to select 16-channel mode.
Hold down the channel 4 mute button to select 8-channel mode.
Model E-1 Model E-1A
IP Address 192.168.1.1 192.168.1.xx*
Netmask 255.255.255.0 255.255.255.0
Gateway 192.168.1.254 192.168.1.254
DHCP off off