Dan Dugan Sound Design E-1 - Manual (Page 23)

Dugan Models E-1 and E-1A User Guide Installation and Configuration
23
Establishing Network Connections
We recommend completing your network connection with a computer before using the
iPad app.
1. Launch Dugan-Utility-yyyymmdd.jar.
Figure 3-7 Dugan Utility
2. Wait a minute and if the list pane is blank, click Refresh List.
If the list pane remains blank, proceed to Manually Add Unit below.
If the list pane displays Dugan units, continue.
3. Click on the first unit in the list so it is highlighted.
The Network Parameters section displays information about that unit.
If Unit Reachable is YES, you are ready to use the Dugan Control Panel with that
unit. If you have additional Dugan units to connect, select the next unit in the list
and repeat this step. If you are finished with installation, proceed to Chapter 4:
Dugan Control Panel.
If Unit Reachable is NO, proceed to the next step.
4. Power down the Model E-1A.
iPad