d&b D80 - Manual (Page 52)

Selecting a particular channel from the Home screen opens the
corresponding Channel setup screen with the respective Channel
tab being active.
The Channel setup screen follows the same layout structure as
described above and is split into the Header and the Data
sections.
Using the tabbed structure of the Channel setup screen provides
direct access to the desired function element of each channel.
In addition, the «Channel mute» button of the selected channel as
well as the "OSP", "GR" and "OVL" indicators for each channel are
available. This allows you to maintain the integrity of the gain
structure within the unit while setting up the user definable EQ as
well as keeping an eye on the Input routing.
10.1. Channel name
Selecting the centered Information field button
(«Edit channel name») in the header of the Channel setup screen
enables you to enter or edit the Channel name (maximum length
15 characters).
The input mask which appears allows either lower-case or upper-
case characters by toggling the corresponding button («abc») on
the bottom left.
Wrong entries can be corrected by tapping the Erase button ( )
on the bottom right.
Tapping «OK» on the top right confirms the entry, closes the input
mask and switches back to the channel setup screen.
Tapping the Back button ( ) on the top left cancels any entry and
switches back to the Channel setup screen keeping the previous
entry.
d&b D80 Manual 1.9 en 52