d&b D80 - Manual (Page 15)

NOTICE!
Due to the high power capability of the device, only operate one
device per phase conductor.
Please also refer to Þ Chapter 12.1. "Power supply"
on page 68, following Þ Chapter 12.1.5. "Mains supply
requirements" on page 69.
Mains voltage Frequency Current
100/120 V 50/60 Hz 30 A
230/240 V 50/60 Hz 15 - 16 A
Before connecting the device to mains voltage, check that the
mains voltage and frequency correspond to the specifications on
the rating label next to the mains connector socket on the rear
panel of the unit.
A powerCON-HC ® mains connector socket [1] is fitted on the rear
panel and an appropriate power cord [2] is supplied.
d&b D80 Manual 1.9 en 15