d&b D80 User Manual

Page 31

Speaker
1. On the bottom left of the «Output» tab, select the «Speaker»

navigation button to enter the Speaker setup subscreen.

2. Choose the desired speaker setups for all channels and

confirm each selected setup by tapping the «OK» button right

next to the «Speaker» selection field.

3. Define the LoadMatch settings, if applicable and desired,

correspondingly.

4. After defining all settings, exit the subscreen by tapping the

Home button ( ).

Note: A detailed description of the Speaker setup and

LoadMatch settings is given in the reference chapter

4. Remote
1. On the Home screen, tap the Device view button to enter the

Device setup menu.

2. Tap the «Remote» tab and define your desired Remote settings

correspondingly.

Note: A detailed description of the remote settings is given in

on page 41.
As all the configurations and settings mentioned above can

also be defined remotely, it depends on how you wish to

proceed whether defining the Remote settings is the last or the

first step when configuring your basic settings.

After defining all settings, exit the subscreen by tapping the Home

button ( ) and carry on with the individual channel settings.

5. Channel setup
1. On the Home screen, tap the Channel view button of the first

channel (A) or pair of channels (A/B) to enter the Channel

setup.

2. Define your individual channel settings such as CUT, HFA,

CPL, Level, DLY or EQ for all channels correspondingly.

3. After defining all settings, exit the subscreen by tapping the

Home button ( ).

Note: A detailed description of the Input routing is given in

on page 56.
A detailed description of the Input mode is given in the

d&b D80 Manual 1.9 en

This manual is related to the following products: