CUE uniCUE - Manual (Page 38)

38
Touch Panel Controllers / Admin Web
© CUE, a.s. All Rights Reserved.
System
Firmware
This page is used for updating the CUEunit firmware.
The Current version of firmware is shown. To upload
new firmware, select the desired version, and click the
Upload button.
Information
The page shows basic information about your
CUEunit’s hardware. The CPU type, CPU frequency, and
the flash and RAM memory sizes are shown.
Format data area
To completely clear all data and restore factory default
settings, click the Format data area button.
This will remove all data, including Applications
and File storage files. Configuration will be cleared,
including IP address, password, and touch-screen
calibration values. IP address will be restored to the
default 192.168.1.128.
Password
A case sensitive password is necessary to login to the
admin web pages. Set a new password via the New
password box. You must reenter the password in the
Confirm new password box. An error message will
appear if the confirmation does not match, in which
case you should reenter your password again in both
boxes.
Finally, the new password is implemented by clicking
the Apply button.