CUE uniCUE - Manual (Page 31)

31
Touch Panel Controllers / On Screen Display
© CUE, a.s. All Rights Reserved.
IP Settings
This page is used for setting the communication parameters
for your touch panel. The touch panel uses standard internet
protocol (IP) communication parameters. Certain parameters
can be reset by the user. On start up, this page will display
current IP address. Carefully note this addressing information
(and any changes you elect to make to the IP address, subnet
mask, or default gateway). This information must be entered
into the Cue Visual Composer program written for your
specific application. For control systems with more than one
unit, a unique IP address must be given to each CUEunit.
For setting please select appropriate field using Edit button
and then use numeric keypad.
Be sure to click the Apply button for any changes to become
effective.
192.168.1.128
255.255.255.0
192.168.1.1
19/04/2011
17:01:25
GMT+01:00 CET/CEST
Date/Time
This page is used for setting Date/Time parameters.
The current date and time can be set. For setting please
select appropriate field using Edit button and then use
numeric keypad.
The time zone box can be selected to enter from the list
activated by button Edit.
Rest of the page is used for synchronization of the CUEunit’s
date and time with an internet clock. Select Yes for Use
Internet clock. Next, enter the IP addresses (or complete
address name) of the primary and secondary NTP servers.