Installation into wet wall – CUE uniCUE User Manual
Page 12
12
Touch Panel Controllers / Mounting
© CUE, a.s. All Rights Reserved.
Installation into Wet Wall
Steps are as follows
1. Chisel out the mounting hole 1 in the wall.
2. Break suitable knockout 3 for comfortable stretch of cable.
3. Insert the back box 2 into the hole 1 and take the cables through broken off knockout.
4. Fix the back box 2 with mortar or plaster.
5. Neaten the visible front part of the back box with stuke or another appropriate material.
6. Adjust the metal holder 7 as described in the chapter Adjusting the Panel on the Wall.
2
3
1
6
7
~ 200 mm
~ 1
45 mm
~ 50 mm