CRU USB DriveDock v5 - Manual (Page 6)

CRU-WiebeTech
U S B D r i v e D o c k U s e r ’ s G u i d e ( A 9 - 0 0 0 - 0 0 3 2 r e v 1 . 0 ) - 6 -
5. Technical Specifications
Product Name USB DriveDock v5
Host Interfaces and
speeds*
USB 2.0: Up to 480 Mbps
USB 3.0: Up to 5.0 Gbps
*Actual throughput is drive dependant.
Drive Interfaces
• 2.5” IDE/PATA interface
• 3.5” IDE/PATA interface
• SATA interface (for both 2.5” & 3.5” drives)
Power Adapter (included) +5V/+12V 2A/2A AC adapter
Compatibility 2.5” & 3.5” SATA and IDE/PATA hard disk drives
Operating System
Requirements
• Windows XP, Vista, Windows 7
• Mac OS X
• Linux distributions supporting USB
Compliance CE, FCC, RoHs
Shipping Weight 2 pounds
Dimensions
3.2” x 2.2” x 0.95” (81mm x 56mm x 24mm)
Dimensions are exclusive of attached plates, drives, and cables.
Support
We don’t want anything to go wrong with your CRU-DataPort product. But if it
does, Tech Support is standing by and ready to help. Contact us through cru-
dataport.com. CRU also offers phone support at (800-260-9800).
WiebeTech is a brand of CRU.
© 2008, 2011 CRU Acquisitions Group, LLC. All rights reserved. DriveDock and WiebeTech are trademarks of CRU Acquisitions
Group, LLC. Other marks are the property of their respective owners.
Limited Product Warranty
CRU-DataPort (CRU) warrants this product to be free of significant defects in material and workmanship for a period of one year
from the original date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but
not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights
with respect to the documentation and hardware. No CRU dealer, agent or employee is authorized to make any modification,
extension, or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement of substitute
products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or
incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has
been advised of the possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at
issue. CRU reserves the right to make modifications and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
home or commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately
5 inches from the DC plug.
4)
Reorient or relocate the receiving antenna.
Tested to comply
with FCC standards
FOR OFFICE OR COMMERCIAL USE