CRU RTX410-IR User Manual
Page 28
CRU
R T X 4 1 0 / 6 1 0 / 8 0 1 - I R U s e r M a n u a l A 9 - 4 6 8 - 0 0 0 5 R E V 1 . 0
- 28 -
The following information is displayed:
Physical Disk Column Descriptions
Slot
The slot number of the hard drive. “1” corresponds to the top bay of RTX , “8” to the
bottom bay. Hover your mouse cursor over the button below the slot number to bring up
configuration options for that particular hard drive, which are detailed below.
Size
The logical capacity of the drive. Can be displayed in megabytes (MB) or gigabytes
(GB).
RG Name
The name of the RAID Group to which the drive is assigned, if any.
Status
Displays the operational status of the disk.
• Online The hard drive is online.
• Rebuilding The hard drive is being rebuilt.
• Transitioning The hard drive is being migrated or is being replaced by
another disk during rebuilding.
• Scrubbing The hard drive is being scrubbed.
Health
Displays general operational health of the disk.
• Good The hard drive is good.
• Failed The hard drive has failed.
• Error Alert The hard drive’s S.M.A.R.T. monitoring system is reporting an
error.
• Read Errors The hard drive has unrecoverable read errors.
Usage
Displays how the disk is currently being used.
• RAID Disk (RD) The hard drive has been assigned to a RAID Group.
• Free Disk (FD) The hard drive is free for use.
• Dedicated Spare (DS) The hard drive has been set as a dedicated spare of
a RAID Group.
• Global Spare (GS) The hard drive has been set as a global spare of all
RAID Groups.
Vendor
Displays the manufacturer of the hard drive.
Serial
Displays the serial number of the hard drive.
Rate
Displays the transfer speed of the hard drive.
• SATA 1.5Gb/s SATA1 disk
• SATA 3.0Gb/s SATA2 disk
RTX IR does not support 6G speed. When a 6G drive is inserted it will only show the speed as 3G.
Write cache
The hard drive’s write cache is enabled or disabled. The default setting is Enabled.
Standby
The hard drive will automatically spin down to save power. The default setting is
Disabled.