CIRCUTOR GETEST Series - Manual (Page 3)

3 Instruction manual
Getest
Features
- Step and contact meter, based on injection of current during 1
mains cycle
- Supply up to 50A to a 12Ohms load. Maximum voltage of
600VAC
- Maximum power equivalent to 30KVA, weighting only 45kg
- Remote controlled with bluetooth link. Software can be easily
upgraded and customized. Can be controlled using almost any
Windows based device. PDAs are recommended
- Data storage, easy to transfer to PC.
- The use of a Windows based device to control the MPC allows to
use all the power of Windows software, and to avoid carrying other
tools, like calculators, notepads...
- Works on 50 and 60Hz networks
- Detects non-resistive grounds, and self-adjust to measure properly
- Measures step voltage, contact voltage and ground resistance
- Up to 10mV accuracy true RMS volt meter. Auto-scale, up to
700V AC
- Up to 10mA accuracy true RMS current meter. Auto-scale, up to
100A AC
- Several safety protections makes almost impossible to cause
damage to persons
- Short-circuit protected outputs (25VAC output, limited to 35A)