CIRCUTOR CVM-BD Series - Manual (Page 16)

-- Supply network analyzers CVM-BD-420-4 & CVM-BD-420-8 -- M98132301-20 --- Page Nº 15
max
Pressing the "max" key, the maximum values for the parameters being shown
appear in the displays.
xxxx MAX
xxxx MAX
xxxx MAX
This function is only valid while you keep pressing the "max" key. If you stop
pressing the key the instantaneous values appear again.
min
Pressing the "min" key, the minimum values for the parameters being shown
appear in the displays.
xxxx MIN
xxxx MIN
xxxx MIN
This function is only valid while you keep pressing the "min" key. If you stop
pressing the key the instantaneous values appear again.
Reset
Pressing the "reset" key the system is reset. This is equivalent to switch off the
power supply of the instrument. The stored maximum and minimum values will be
automatically deleted from the internal memory.
If you are in the setup process and press the "reset" key, you exit it without saving
any modification that you have done and making a reset of the system.