CIRCUTOR CVM-MINI Series - Manual (Page 20)

Page 20 of 26
{m_n
{=^_`
{hi
{m_n
{=^_`
{s_m
Figure 53. Non-standard communication
parameters
Figure 54. Predefined communication
parameters
4.2.2 Peripheral number
The peripheral number varies between 0 and 255 (0 and FF in hexadecimal).
To write or change the number of the peripheral, repeatedly press the
max key
increasing the value of the digit which is flashing at the time.
When the required value is on the screen, move on to the following digit by
pressing
min , to allow the remaining values to be changed.
When the last digit has been changed, press min to move back to the first digit,
allowing the previously set values to be changed again. To enter the data and
access the next setting step, press
.
{m_n
{hj_l
{{**+
Figure 55. Peripheral number
4.2.3 Transmission speed
The transmission speed of RS485 communication bus may be: 1,200 bps, 2,400
bps, 4,800 bps, 9,600 bps or 19,200 bps. To select one of the transmission
speeds available, press the
max key and the four options will alternate in turn.
Once the required option is selected, press the key to enter the data and
access the next setting step.
{m_n
{\[o^
{{+3,**
Figure 56. Transmission speed
4.2.4 Parity
Parity may be selected, even or odd; to select the type of parity, press the max
key and the three options will alternate in turn. Once the required option is
selected, press the
key to enter the data and access the next setting step.