1 overview menu-based program entry – BINDER MK 53 User Manual
Page 34

MK (E2.1) 10/2014
page 34/73
9.1 Overview menu-based program entry
Display showing the initial normal display in Idle Mode
W
X
08:43:55 15.12.13
CONFIG
VIEW->
PGM
TEMP
0.0
26.8
°C
HAND
Press the “PGM” button. The window
program selection appears
Select a program via the arrow keys and confirm by pressing ENTER
The following display serves to select a
subroutine:
08:43:57 15.12.13
Prog. Select.
Prog 1 PROG 01
Prog 2 PROG 02
Prog 3 PROG 03
Prog 4 PROG 04
Prog 5 PROG 05
Prog 6 PROG 06
Prog 7 PROG 07
Prog 8 PROG 08
Prog 9 PROG 09
Prog 10 PROG 10
Prog 11 PROG 11
Prog 1 PROG 01
TP- Program 2
TP- Program 3
TP- Program 1
Select the first subroutine “
TP-Program 1” (TP-Program 2 und TP-Program 3 are without function) and
confirm by pressing ENTER.
A
program table will appear, which is initially empty until you enter the temperature values. You can now
enter the temperature program.
Temperature at the beginning
of the program section
Fan speed in %
Factory setting:
0% in Idle Mode
100 % in Manual Mode and
Program Mode
Program No.
Subprogram TP-Program No. 1
08:43:55 15.12.13
Total number of program
sections
Parameter set (preselected)
Tolerance band limits tem-
perature (maximum and min-
imum temperature)
Operation line 1
(Bedew protection)
Duration of program
section
Number of start section in case
of repeat cycles
Number of repeats in case of
repeat cycles
DEL PGM
08:43:55 15.12.13
Prog select Fr. Abs. 372
Prog 1 PROG 01
Prog 2 PROG 02
Prog 3 PROG 03
Prog 4 PROG 04
Prog 5 PROG 05
Prog 6 PROG 06
Prog 7 PROG 07
Prog 8 PROG 08
Prog 9 PROG 09
Prog10 PROG 10
Prog11 PROG 11
Prog12 PROG 12
Prog13 PROG 13
Prog14 PROG 14
Prog15 PROG 15
Prog16 PROG 16