BINDER MK 53 - Manual (Page 14)

MK (E2.1) 10/2014 page 14/73
1.6 Intended use
The alternating climate chamber MK is suitable for temperature treatment of solid or pulverized charging
material, as well as bulk material, using the supply of heat or cold. It is suitable for harmless materials. A
mixture of any component of the charging material with air must NOT be explosive. The operating tem-
perature must lie below the flash point or below the sublimation point of the charging material. Any com-
ponent of the charging material must NOT be able to release toxic gases.
Other applications are not approved.
The alternating climate chamber MK can be used for drying purposes but are specially designed for solv-
ing all the problems which occur during material and ageing tests.
Do NOT use the unit for drying purpose, especially if greater quantities of steam leading to condensation
will be set free.
Observing the instructions in this operating manual and conducting regular maintenance work
(chap. 15) is part of the intended use.
DANGER
Explosion or implosion hazard.
Danger of poisoning.
Danger of death.
∅
Do NOT introduce any substance combustible or explosive at working temperature into
the alternating climate chamber.
∅ NO explosive dust or air-solvent mixture in the inner chamber.
∅ Do NOT introduce any substance which could lead to release of toxic gases.
The charging material shall not contain any corrosive ingredients that may damage the ma-
chine components made of stainless steel, aluminum, and copper. Such ingredients include in
particular acids and halides. Any corrosive damage caused by such ingredients is excluded
from liability by BINDER GmbH.