BINDER FED 53 User Manual
Page 48
FED (E2) 02/2015
page 48/55
Unit size
53
115
240
400
720
Standard equipment (continued)
Temperature safety device class 2 acc. to DIN
12880 with visual temperature alarm
Adjustable ramp function
Rear exhaust duct, internal diameter 50 mm / 1,97
inch with ventilation slide
Adjustable air change by means of rear exhaust
duct (50 mm) with ventilation flap and front
ventilation slide
Four castors (2 lockable)
--
--
--
--
2 racks, chrome-plated
RS 422 interface for communication software APT-
COM™ DataControlSystem, or switch over to
printer output with RS 232/RS 422 interface
converter
Unit size
53
115
240
400
720
Options / accessories
Access ports with various diameters, with silicone
plug
Rack, chrome-plated or stainless steel
Perforated rack, stainless steel
Rack lockings (4 pieces)
Reinforced rack stainless steel, with 1 set rack
lockings
--
--
Reinforced inner chamber with 2 reinforced racks
--
--
Rubber pads for safe stacking (4 pieces)
--
--
Temperature safety device class 3.1 acc. to DIN
12880
Disconnectable audible over-temperature alarm
Door with window and interior lightning
Lockable door
FKM door gasket (temperature resistant up to 200
°C)
HEPA Fresh air filter, class H 14 (DIN EN 1822)
Measurement of air change rate acc. to ASTM
D5374
Increased air change by stronger fan
Mostly gas-tight version
--
--
--
Inert gas connection (gas inlet and outlet), with
mostly gas-tight version
--
--
--
Analog output 4-20 mA for temperature with 6 pole
DIN socket, DIN plug included
Data Logger Kit T 350
Temperature calibration including certificate
Spatial temperature measurement including
certificate
Qualification folder
Unit acc. to cUL standard in 115V 1N~60Hz
--
--
--
Unit acc. to cUL standard in 208 V 3N~60Hz
--
--
Base on castors
--
--
--
Sturdy trolley, castors with locking brakes
--
Legend: Standard equipment
Optional -- Not available