AXING SKP 2-00 - Manual (Page 14)

Programming
SKP 2-00
© AXING AG – state of the art: 8.12.10 – Reserving change in design and type Page 14
Select the menu item “Menu language” and
confirm with OK.
After selecting this menu item, the menu
language can be changed with theVOL /
VOL keys.
4.3.6 CI Menu
If an CA module is plugged in the duct, the "CI
Menu" submenu appears in the main menu.
Fig. 25 CI Menu
The menu item is activated by pressing the OK
key. The submenu item "Common interface
selector menu" is opened.
Depending on the module used (Mascom-
Alphacrypt, Technisat-Cryptoworks etc.),
several settings can be carried out there. It is
also possible to query information on Smart
Cards.
For information about the individual settings in
the submenu, please refer to the manufacturer
of the module.
4.3.7 Exit the configuration
Fig. 26 Exit the configuration
Select the menu item “Exit” and confirm with
OK.
After selecting the menu item “Exit”, the
programming is ended. All settings are saved.
After exit the programming, the programming
selection switch must be set to centre position.
4.4 Other functions
Additional settings can be made without
starting the main menu.
Setting the audio level
The audio level can be adjusted using the VOL
/ VOL keys.
Fig. 27 Setting the audio level
Change program
The received program can be changed
according to the program list using the CH /
CH keys.
The program list is loaded by means of the
“EPG” key.
Fig. 28 Channel list
The desired program can be selected from the
list by means of the CH /CH keys.
After pressing the “OK” key, the program is
applied.
Additional program information can be loaded
by means of the “INFO” key.
Display input signal quality
After pressing the “F1” key, the quality of the
input signal is displayed.
Fig. 29 Quality of the input signal
The display is closed by pressing “EXIT”
Note