3 configuration – AXING SKP 2-00 User Manual

Page 11

Programming

SKP 2-00

Page 11

4.3.3 Configuration

Fig. 12

Configuration

Fig. 13

Possible settings

Selection submenu Audio Language
With VOL / VOL preset languages are
selected (The broadcasting service must
support the selected language).

Fig. 14

Audio menu

Selection of regional windows in the sub

menu Subtitles Language
By means of VOL / VOL you can switch to
this regional window if these channels offer a
so-called regional window.

OFF: As soon as the selected channel offers a
regional window, the channel switches over to
it during transmission; after having closed the
regional window, the main program runs again.

eng or another language code: The regional
window is ignored; the main program of the
corresponding channel is always transmitted.

Selection submenu Control Mode for Scan
With VOL / VOL , the desired LNB setting
is selected. This setting is used during satellite
scanning. The following selection is possible:

• Low vertical, low horizontal
• High vertical and high horizontal.
• Universal LNB

• Toneburst
• DiSEqC 1.0
• DiSEcQ 1.0 - A • DiSEcQ 1.0 - B
• DiSEcQ 1.0 - C • DiSEcQ 1.0 - D
In case of a Single-LNB, the selection must be
set to "Universal LNB".

Selection submenu Scan Satellite
The menu item is activated by pressing the OK
key.

Programs are searched in the selected
satellite based on the settings of "Control
Mode for Scan". When selecting a certain LNB
level, like Low horizontal etc. only this level will
be scanned. Other settings, such as Universal
LNB, result in the entire satellite being
searched.

Scanning satellites is very time consuming. If
only certain programs are to be scanned, the
option "Scan Transponder" should be
selected.

Fig. 15

Scanning a satellite

Select menu item “Configuration” and
confirm with OK.

Note