Applied Motion BD10-H4-AH - Manual (Page 9)

9
BD5/10 Drive Hardware Manual 920-0065D
2/14/2014
Connecting the Power Supply
The BD5/10 accepts a DC power supply voltage from 12 to 48V. Using the connector supplied and AWG16 or
18 wire, connect to the power supply as shown below:
Be careful not to reverse the wires. Reverse connection may destroy your drive.
+DC
-DC
To Earth Ground
Grounding
Screw
FUSE
LINE FILTER
(OPTIONAL)
Locate an optional line filter adjacent
to the drive for full CE compliance
External (Line) Fuse Criteria
We recommend the Bussman ABC series of fast-blo, ceramic body fuses.
For all DC supply currents up to 9A (this includes peak values) use the ABC-12-R This is a 12A fast-blo ROHS
fuse.
For all currents above 9A (this includes peak values) use the ABC-15-R. This is a 15 A fast-blo ROHS fuse.
The internal fuse is not user-replaceable, if tripped, the unit must be returned for repair.