Applied Motion BD10-H4-AH - Manual (Page 17)

17
BD5/10 Drive Hardware Manual 920-0065D
2/14/2014
Analog Input (AIN)
A 0 to 5V analog input is provided for setting the motor speed. 5V = 4500 rpm. This speed is used when the
M0, M1 and M2 inputs are open (OFF) and the SPST input is closed (ON).
Output Signals
FLT (FAULT)
Closes for the following conditions: overtemperature, overcurrent, under voltage, overvoltage, internal voltage
error.
SPO (SPEED OUT)
This output closes when the motor is within 200 rpm of the target speed..