Optoma EH7700 - Manual (Page 73)

73
English
Appendices
About AMX Device Discovery facilitate configuration of the •
control system of AMX and its target devices.
To use this technology, it is necessary to set CONTROL
SYSTEM in the NETWORK menu. (See pages 48.)
For details, see the website of AMX.
URL http://www.amx.com/
About PJLink™ •
To use PJLink™ Function, the PJLink™application soft-
ware is required.
To use this function, set the network certification properly
according to the setting of the network application to be
used. (See page 48.)
For the specifications of JBMIA PJLink™ access to the
Web site of Japan Business Machine and Information
System Industries Association (JBMIA).
(http://pjlink.jbmia.or.jp/english)
This projector is full to complaint to the specifications • of
JBMIA PJLink™ Class 1. It supports all the commands de-
fined by PJLink™ Class 1, and the compliance has been
verified with the PJLink™ standard specifications Version
1.0.
Important:
•
For the commutation for PJLink™, see the table on the
next page.
The control may not be performed correctly or the moni-
toring data may not be obtained correctly in the following
conditions:
During standby `
During zoom/focus adjustment `
During lens shift adjustment `
During input source switching `
During auto position execution `
During Shutter `
During command processing `
Before the splash screen disappears after the power is turned `
on.
During zoom/focus adjustment, lens shift adjustment, Shutter , `
etc., it may take approx. 5seconds to receive a response to a
command.