Optoma EH7700 - Manual (Page 21)

21
English
User Controls
Remote Control
Using the Remote Control
Power On
Refer to the “Power On/Off the Projector”
section on pages 14-15.
Power Off
Refer to the “Power On/Off the Projector”
section on pages 14-15.
Function 2 Adjust Function 2 settings.
Lens Zoom +/- Adjust lens zoom function.
Lens Shift Adjust lens shift function.
Pattern Display a test pattern.
Mode
Select the display mode from Presentation,
Bright, Movie, sRGB, Blackboard and
DICOM SIM..
ID Set the remote code.
All Restore the default remote code.
YPbPr
Press “YPbPr” to choose component video
(YPbPr) input connector source.
Re-SYNC
Automatically synchronizes the projector to
the input source.
VGA 1
Press “VGA 1” to choose VGA1-In input
connector source.
VGA 2
Press “VGA 2” to choose VGA2-In input
connector source.
BNC
Press “BNC” to choose BNC (YPbPr/RG-
BHV) input connector source.
S-Video
Press “S-Video” to choose S-Video input
connector source.