Telnet commands, Amx device discovery commands, Telnet commands amx device discovery commands – Optoma EH7700 User Manual
Page 69: Appendices, 69 english
69
English
Appendices
Telnet Commands
Port: support 3 ports of 23/1023/2023
•
Multi-connections: Projector could receive commands from
•
different ports at the same time
Command Format: Follow RS232 command format (sup-
•
port both of ASCII and HEX)
Command Response: Follow RS232 return message.
•
Lead Code Projector ID
Command ID
space
variable
carriage
return
~
X
X
X
X
X
n
CR
Fix code One
Digit~
00
Defined by Optoma 2 or
3 Digit. See the Follow
content
One Digit
Per item
Definition
Fix code One
Digit
AMX Device Discovery commands
UDP : 239.255.250.250
•
Port No. : 9131
•
Each UDP broadcast information as below are updated
•
around 40 seconds
When the data length is greater or shorter than indicated by the data length
code, the projector returns the error code to computer.
Command
Description
Remark (Parameter)
Device-UUID
MAC address (Hex value without’ ‘:’ separa-
tor)
12 digits
Device-SKD-
Class
The Duet DeviceSdk class name
VideoProjector
Device-Make
Maker name
MakerPXLW
Device-Model
Model name
Projector
Config-URL
Device’s IP address
LAN IP address is shown up if LAN IP ad-
dress is valid.
Wireless LAN IP address is shown up if
Wireless LAN IP address is valid.
http://xxx.xxx.xxx.xxx/index.html
Revision
The revision must follow a major.minor.micro
scheme. The revision is only increased if the
command protocol is modified.
1.0.0