TOYOTA 2011 Prius - Manual (Page 429)

405
3-6. Other interior features
3
Interior features
PRIUS_U (OM47685U) DVD
Reprogramming a HomeLink ® button
The individual HomeLink ® buttons cannot be erased but can be
reprogrammed. To reprogram a button, follow the programming
instructions.
Press and hold the desired HomeLink ® button. After 20 sec-
onds, the HomeLink ® indicator light will start flashing slowly.
Keep pressing the HomeLink ® button and press and hold the
transmitter button until the HomeLink ® indicator light changes
from a slow to a rapid flash. Release the buttons.
Follow the procedure from STEP 3 in “Programming the
HomeLink
® ”. (
→P. 401)
Erasing the entire HomeLink ® memory (all three programs)
Press and hold down the 2 out-
side buttons for 10 seconds until
the indicator light flashes.
Do not press and hold the
HomeLink
® buttons for more than
20 seconds.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
® memory.
STEP 1
STEP 2