TOYOTA 2011 Prius User Manual

Page 427

403

3-6. Other interior features

Interior features

PRIUS_U (OM47685U) DVD

Programming a Rolling Code system (for U.S.A. owners)

If your device is Rolling Code equipped, follow the steps under the
heading “Programming the HomeLink

” before proceeding with the

steps listed below.

Locate the training button

on the ceiling mounted garage

door opener motor. The exact location and color of the button
may vary by brand of garage door opener.

Refer to the operation manual supplied with the garage door opener
for the location of the training button

Press the training button

Following this step, you have 30 seconds in which to initiate step 3
below.

Press and hold the vehicle’s programmed HomeLink

button

for 2 seconds and release it. Repeat this step once again. The
garage door may open.

If the garage door opens, the programming process is complete. If
the door does not open, press and release the button a third time.
This third press and release will complete the programming process
by opening the garage door.

The ceiling mounted garage door opener motor should now recog-
nize the HomeLink

transceiver and operate the garage door.

Repeat the steps above to program another rolling code sys-
tem for any of the remaining HomeLink

buttons.

: Names such as “learn”, “smart” or others vary according to manufac-

turer.

STEP