TOYOTA 2011 Prius User Manual
Page 267
241
2-4. Using other driving systems
2
When
d
riving
PRIUS_U (OM47685U) DVD
n
Flicker effect
When the camera is used under fluorescent lights, sodium lights, mercury
lights, etc., the lights and the illuminated areas may appear to flicker.
CAUTION
n
When using the rear view monitor system
Observe the following precautions to avoid an accident that could result in
death or serious injuries.
l
Never depend solely on the rear view monitor system when reversing.
l
Always check visually and with the mirrors to confirm your intended path is
clear.
l
Always check the vehicle surrounding area, because the guide lines are
estimates of distance and location.
l
The guide lines are assistant lines and do not change even if the steering
wheel is turned.
l
Depicted distances between objects and flat surfaces differ from actual
distances.
l
Do not use the system if the back door is not completely closed.
n
Conditions which may affect the rear view monitor system
l
If the back of the vehicle is hit, the camera’s position and mounting angle
may change. Contact your Toyota dealer.
l
Rapid temperature changes, such as when hot water is poured on the
vehicle in cold weather, may cause the system to function abnormally.
l
If the camera lens is dirty, it cannot transmit a clear image. Rinse with
water and wipe with a soft cloth. If extremely dirty, wash with a mild
cleanser and rinse.
l
The displayed image may be darker and moving images may be slightly
distorted when the system is cold.
n
Caution while driving in reverse
Do not change modes while the vehicle is moving. Doing so may cause an
accident.