D-Link DSL-500 - Manual (Page 55)

DSL-500 ADSL Router User’s Guide
IP Address Router LAN IP Address
Subnet Mask Subnet Mask on LAN
IP Address
Configuration
MAC Address Fixed Hardware ID of Router
Login User Name User name used for PPP login
PPP Login Information
Authentication Method used for PPP authentication
IP Address WAN IP address used for account
WAN (PPP) Information
Connection Status WAN connection status
VPI Virtual Path Identifier
PVC
VCI Virtual Circuit Identifier
Mode WAN Connection Protocol
Connection Type
Encapsulation
Method
Packet encapsulation method
Proxy DNS Status of proxy DNS function
Get DNS IP automatically
Status of auto-detect DNS, enabled indicates
the Router will get DNS information from the
WAN (usually from the ISP server) if disabled, a
DNS server IP address must be manually
entered
DNS Server IP
IP address of DNS server being used, if there is
no DNS server detected IP address will be
0.0.0.0
DHCP Configuration DHCP server status
UPnP State UPnP status
NAT Configuration NAT status
DMZ State DMZ status
IP Filter State Filtering status
Date/Time
NTP status (enabled indicates Router is using
NTP server)
Event Log Event log status
Remote Administration Access Remote administration status
45