Pilz PSSnet GW1 MOD-CAN - Manual (Page 36)

Operation
Operating Manual PSSnet GW1 MOD-CAN
1002693-EN-02
36
LED LED status Meaning
Run/Err Green Gateway in "Operational" status
1
Green Gateway in "Stopped" status
Green Gateway in "Pre-Operational" status
Red CAN controller is in "Bus Off" status
1
Red Error threshold value has been reached, the
CAN controller has received too many error
telegrams
2
Red Monitoring error, activation of master-slave
monitoring, e.g. heartbeat monitoring
3
Red Error in "Synchronisation" status. A synchroni-
sation telegram, e.g. to write simultaneously
on several devices, did not occur within the
configured time.
No supply voltage
Web server
A web server is implemented within the Gateway; it is started once the Gateway is connect-
ed to the supply voltage.
The web server is intended for use with Internet Explorer or Firefox.
Make sure that Javascript and Cookies are enabled in your browser's security settings.
Call web server
1. Connect the Gateway to the PC.
2. Call up the following HTML page:
– http://192.168.0.xxx
– For xxx, enter the value that you have set as the last byte of the IP address.
3. Enter the user name and password correctly and log on to the web server.
4. Select the option you require from the options in the overview and then follow the in-
structions.
Password management
} For access to the web server, two users have been preset in its delivery condition.
Users Access type Password
User Read access only 1111
User Read and write access 0000
} Access without a password is not possible.
} User names and passwords can be changed.
7.2
7.2.1
7.2.2