Uniden BCD396XT - Manual (Page 244)

244
Append TGID Group
Controller → Radio
AGT,[SYS_INDEX][\r]
Radio → Controller
AGT,[GRP_INDEX][\r]
[SYS_INDEX] : System Index
[GRP_INDEX] : appended TGID Group Index
Append TGID Group to the system.
Returns "-1" if the scanner failed to create because of no resource.
This command is only acceptable in Programming Mode.
Delete Group / Site
Controller → Radio
DGR,[INDEX][\r]
Radio → Controller
DGR,OK[\r]
[INDEX] : Group / Site Index
This command deletes a Channel Group, TGID Group or Site.
This command is only acceptable in Programming Mode.
Get/Set Group Info
Controller → Radio
GIN,[GRP_INDEX][\r]
GIN,[GRP_INDEX],[NAME],[QUICK_KEY],[LOUT],[LATITUDE],[LONGITUDE],[RANGE],
[GPS ENABLE][\r]
Radio → Controller
GIN,[GRP_TYPE],[NAME],[QUICK_KEY],[LOUT],[REV_INDEX],[FWD_INDEX],[SYS_INDEX],
[CHN_HEAD],[CHN_TAIL],[SEQ_NO] ,[LATITUDE],[LONGITUDE],[RANGE],[GPS ENABLE]
[\r]
GIN,OK[\r]
For Group Information
[GRP_INDEX] : Group Index
[GRP_TYPE] : Group Type (C: Channel Group / T: TGID Group)
[NAME] : Name (max.16char)
[QUICK_KEY] : Quick Key (1-9,0: means 10, .(dot): means none)
[LOUT] : Lockout (0:Unlocked / 1:Lockout)
[REV_INDEX] : Reverse Group Index of the System
[FWD_INDEX] : Forward Group Index of the System
[SYS_INDEX] : System Index
[CHN_HEAD] : Channel Index Head of the Group List
[CHN_TAIL] : Channel Index Tail of the Group List
[SEQ_NO] : Group Sequence Number of the System
[LATITUDE] : North or South Latitude
[LONGITUDE] : West or East Longitude
[RANGE] : Range (1-250 : 1= 0.5 mile or km)
[GPS ENABLE] : GPS Location detection (0:OFF/1:ON)