Uniden BCD396XT - Manual (Page 225)

225
Power OFF
Controller → Radio
POF[\r]
Radio → Controller
POF,OK[\r]
Turns off the scanner.
After this command, the scanner doesn't accept any command.
Go to quick search hold mode
Controller → Radio
QSH,[FRQ],[RSV],[MOD],[ATT],[DLY],[RSV],[CODE_SRCH],[BSC],[REP],[RSV],
[AGC_ANALOG],[AGC_DIGITAL],[P25WAITING][\r]
Radio → Controller
QSH,OK[\r] or
QSH,NG[\r]
[FRQ] : Frequency (The right frequency)
[MOD] : Modulation (AUTO/AM/FM/NFM/WFM/FMB)
[ATT] : Attenuation (0:OFF / 1:ON)
[DLY] : Delay Time (-10,-5,-2,0,1,2,5,10,30)
[CODE_SRCH] : CTCSS/DCS/P25 NAC Search
(0:OFF / 1: CTCSS/DCS / 2: P25 NAC Search)
[BSC] : Broadcast Screen (16digit: ########･･#)
(each # is 0 or 1) ||||||||･･+- Band10
0 means OFF |||||||| :
1 means ON |||||||+---- Band 2
||||||+----- Band 1
|||||+------ Reserve
||||+------- NOAA WX
|||+-------- VHF TV
||+--------- UHF TV
|+---------- FM
+----------- Pager
[REP] : Repeater Find (0:OFF / 1:ON)
[AGC_ANALOG] : AGC Setting for Analog Audio (0:OFF / 1:ON)
[AGC_DIGITAL] : AGC Setting for Digital Audio (0:OFF / 1:ON)
[P25WAITING] : P25 Waiting time
(0,100,200,300, .... , 900,1000)
0 : 0ms
100 : 100ms
200 : 200ms
300 : 300ms
400 : 400ms
500 : 500ms
600 : 600ms
700 : 700ms
800 : 800ms
900 : 900ms
1000 : 1000ms
[RSV] : Reserve Parameter * This is always only “,”.
This command is invalid when the scanner is in Menu Mode, during Direct Entry
operation, during Quick Save operation.