Uniden BCD396XT - Manual (Page 212)

212
[ EDACS SYSTEM ]
Display Format
1) AA-FFS Normal ID
AA is 2 digits (0 filling)
FF is 2 digits (0 filling)
S is 1 digit
2) AA---- Partial ID (free FLEET and SUB-FLEET)
AA is 2 digits (0 filling)
3) AA-FF- Partial ID (free SUB-FLEET)
AA is 2 digits (0 filling)
FF is 2 digits (0 filling)
Input Format
1) AA-FFS Normal ID
AA should be 2 digits (0 filling)
FF should be 2 digits (0 filling)
S should be 1 digit
2) AA- Partial ID (free FLEET and SUB-FLEET)
AA should be 2 digits (0 filling)
3) AA-FF Partial ID (free SUB-FLEET)
AA should be 2 digits (0 filling)
FF should be 2 digits (0 filling)
Range
AA : AGENCY 2digits (00-15)
FF : FLEET 2digits (00-15)
S : SUB-FLEET 1digit (0-7)
*ALL0(00-00-0) is invalid
Note

Both AFS and Decimal Format are valid to input regardless of AFS setting.

Display Format depends on AFS/Decimal setting except for I-CALL ID.

Use Decimal format when I-CALL is needed.

I-CALL format is always shown in Decimal Format regardless of AFS setting.

AFS format cannot support I-CALL ID format.

Display Format is also valid in remote command input.