Uniden BCD396XT - Manual (Page 164)

Friday, November 07, 2008 164
[Hold / ] key
Press this key to set the Close Call Mode to off and go to Scan Mode.
[L/O] key
Press this key to go to Rvw Search L/O.
[1 - 3 / sr 1 - 3] key
Press this key to start searching the search range set at Set Search Key.
[4 / LEFT / ifx] Key
While monitoring a frequency, press this key to exchange IF (intermediate frequency) for the current
frequency.
[7 / att] key
Press this key to toggle the attenuator state for Close Call bands.
Long press this key to toggle the global attenuator status.
[8 / rev] key
Long press this key to show the reverse frequency for the current frequency.
And release this key to return to the current frequency.
[9 / mod] Key
Press this key to change the modulation.
[0 / WX] key
Press this key to change WX Alert Priority Mode.
Long press this key to start WX Scan.
[E / yes / gps] key
Press this key to change to the GPS Mode.
[Menu] key
Press this key to go to Close Call
Key Operation During Close Call Hold Mode
Normal Mode
[Scroll Control] knob
Turn this knob to go to the Quick Search Hold Mode.
[Scan / srch] key
Press this key to go to Scan Mode.
[Hold / ] key
Press this key to return to previous mode.