Uniden BCD396XT - Manual (Page 240)

240
Append Site
Controller → Radio
AST,[SYS_INDEX],[RSV][\r]
Radio → Controller
AST,[SITE_INDEX][\r]
[SYS_INDEX] : System Index
[SITE_INDEX] : Appended Site Index
Append Site to the system.
Returns "-1" if the scanner failed to create because of no resource.
This command is only acceptable in Programming Mode.
Get/Set Site Info
Controller → Radio
SIF,[INDEX][\r]
SIF,[INDEX],[NAME],[QUICK_KEY],[HLD],[LOUT],[MOD],[ATT],[C-CH],[RSV],[RSV],
[START_KEY],[LATITUDE],[LONGITUDE],[RANGE],[GPS_ENABLE],[RSV],[MOT_TYPE],
[EDACS_TYPE],[P25WAITING],[RSV][\r]
Radio → Controller
SIF,[RSV],[NAME],[QUICK_KEY],[HLD],[LOUT],[MOD],[ATT],[C-CH],[RSV],[RSV],
[REV_INDEX],[FWD_INDEX],[SYS_INDEX],[CHN_HEAD],[CHN_TAIL],[SEQ_NO],
[START_KEY],[LATITUDE],[LONGITUDE],[RANGE],[GPS_ENABLE],[RSV],[MOT_TYPE],
[EDACS_TYPE],[P25WAITING],[RSV][\r]
SIF,OK[\r]
[INDEX] : Site Index
[NAME] : Name (max.16char)
[QUICK_KEY] : Quick Key (0-99/.(dot) means none)
[HLD] : Site Hold Time (0-255)
[LOUT] : Lockout (0:Unlocked / 1:Lockout)
[MOD] : Modulation (AUTO/FM/NFM)
[ATT] : Attenuation (0:OFF/1:ON)
[C-CH] : Control Channel Only (0:OFF / 1:ON)
[REV_INDEX] : Reverse Site Index of the Scan Setting
[FWD_INDEX] : Forward Site Index of the Scan Setting
[SYS_INDEX] : System Index
[CHN_HEAD] : Channel Index Head of the Group List
[CHN_TAIL] : Channel Index Tail of the Group List
[SEQ_NO] : Site Sequence Number (1-256)
[START_KEY] : Startup Configuration (0-9/.(dot) means none)
[LATITUDE] : North or South Latitude
[LONGITUDE] : West or East Longitude
[RANGE] : Range (1-250 : 1= 0.5 mile or km)
[GPS_ENABLE] : GPS Location detection (0:OFF/1:ON)
[MOT_TYPE] : Band type for MOT/EDACS(STD/ SPL/CUSTOM)
[EDACS_TYPE] : EDACS (WIDE/NARROW)
[P25WAITING] : P25 Waiting time(0,100,200,300, .... , 900,1000)
[RSV] : Reserve Parameter * This is always only “,”.
Get/Set Site Information.