Xblue Networks X16 - Manual (Page 42)

X16 Installation Guide
- 42 - Issue 2
Ph
on
e S
etu
p
Waiting Time – The call waiting time is the
amount of time a call will ring before it is sent
to the programmed destination. Waiting Time
uses the up or down navigation key to select
from 00 (Immediate Forward) to 25 seconds.
Forward Destination – Extension users may
select from three destinations; Off, Voice
Mail, External Call and Trunk2Trunk.
Off – Calls will not forward
Voice Mail – Calls will be forwarded to the
users‟ personal mailbox. The center
navigation button will be lit solid.
External – The system will transfer an
incoming caller, using a second CO Line, to
an external destination.
Note: External Call forward uses two CO Lines,
and you may experience a volume loss when
analog lines are connected using this feature. Also,
toll charges may apply. If all CO Lines are busy, the
call will not forward.
TRK2TRK – Allows calls to be transferred to
an external destination using the telephone
networks facilities. This may require special
features from the network provider.
Phone Number- Enter the telephone number
to be dialed when the External or TRK2TRK
forward timer expires. This can be any
external telephone number such as a cellular
or home telephone number.
Each extension can set up their own voice
mail parameters.
Remote Code – The remote code is the code
that an extension user will dial to access
voice mail from a remote location.
AUTO MUTE Waiting Time
=10 Seconds
AUTO MUTE FWD Destination
AUTO MUTE FWD Destination =Off
AUTO MUTE FWD PhoneNumber
=(Empty)
AUTO MUTE
VoiceMail Setup
AUTO MUTE Remote Code