Issue 2 – Xblue Networks X16 User Manual
Page 41

Issue 2
-
41 -
Ph
on
e
Se
tu
p
Ringer Type – Each extension user may
select from 6 different ring tones for each of
the 6 CO Lines. Press the navigation key up
or down to scroll through the different tones.
Press the center navigation key to save the
current tone.
If a second call rings into the system while
you are on a call you will hear a beep tone.
Change this parameter to “No” to eliminate
the tone.
When set to “Off” the backlit display will go
into power saver mode and go dark after 60
seconds. The X16 telephone will illuminate if
it rings or a button is pressed.
When Caller ID is set to “Off”, the extension
will not receive, nor will it be able to access
Caller ID information. When set to “On” the
extension will receive caller ID as normal.
Call Forward – Each extension can select
where calls will be forwarded to when they
are busy or when a call goes unanswered.
Line1 Ring Type
=Type-1
Line2 Ring Type
=Type-1
Line3 Ring Type
=Type-1
Line4 Ring Type
=Type-1
Line5 Ring Type
=Type-1
Line6 Ring Type
=Type-1
AUTO MUTE
Ringing Type
AUTO MUTE
Call Forward
AUTO MUTE
2
nd
Call Beep
= Yes
AUTO MUTE
LCD Backlight
=On
AUTO MUTE
Caller ID
=On