WebDT DT312/ DT362 Modules BOG (XPE/ XPPro) User Manual
Page 6
WebDT Mobile Tablet Barcode Scanner Operation Guide
www.dtresearch.com
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
http://www.dtresearch.com
Copyright © 2011, DT Research, Inc. All Rights Reserved.
DT Research and WebDT are registered trademarks of DT Research, Inc.
To Test Magnetic Stripe Reader Module
Click
1.
Start | All Programs | Accessories | Notepad to run the Notepad.
Swipe a magnetic stripe card across the module. The output will appear in the
2.
Notepad screen.
Verify the captured data.
3.
Default Port Parameters for Magnetic Stripe Reader Module
SPECIFICATIONS
Reference Standards
ANSI/ISO Standards 7810, 7811-1/6, 7812 & 7813
-
JIS X6301, X6302
-
AAMVA
-
Recording Method
Two frequency coherent phase (F2F)
Decoding Method
ISO Track1: IATA, Track2: ABA, Track3: THRIFT
JIS: JISI-Tk1, TK2; JISII-Tk NTT
AAMVA
Card Swiping Direction
Bi-directional
Card Swiping Speed
Card speed through the unit may vary from 3ips to 100ips
(7cm/s to 250cm/s)
Life
Electronics 125,000 hours
Head 1,000,000 passes
Note: Specifications are subject to change without notice.
Port
COM2
Baud Rate
19200
Data Bits
8
Parity
None
Stop Bits
1
Flow Control
None