beautypg.com

Specifications, Barcode scanner 2/2 – WebDT DT312/ DT362/ DT390/ DT390i Modules BOG (Win7/ WES7) User Manual

Page 2

background image

WebDT Mobile Tablet Barcode Scanner Operation Guide

To Connect Barcode Scanner Module

To connect the Barcode Scanner, use the WebDT Keyboard Wedge. Tap on the

icon in the

task bar, a menu displays as shown in the picture below. Select Connect Scanner.

To Test Barcode Scanner Module

Click

1.

Start | All Programs | Accessories | WordPad to run

the WordPad.
Scan one of the several supported barcode Symbologies.

2.

The output will appear in the WordPad screen.
Verify the captured data.

3.

The Default Port Parameters for Barcode Scanner Module

Port

COM3

Baud Rate

57600

Data Bits

8

Parity

None

Stop Bits

1

Flow Control

None

SPECIFICATIONS

Scanning

Performance

Scan rate

2D mode: 56 images/s auto adaptive
Linear (1D)emulation mode: 200 scans/s auto adaptive

Scan angle

38.9° (Horizontal), 25.4°(Vertical)

Optical resolution

752 (H) x 480 (V) pixels, 256 gray levels

Print contrast

down to 25%

Versions

Standard range and high density

Note: Specifications are subject to change without notice.

www.dtresearch.com

signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

http://www.dtresearch.com

Copyright © 2012, DT Research, Inc. All Rights Reserved.
DT Research and WebDT are registered trademarks of DT Research, Inc.

Linear Imager Compliance and Precaution

This product complies with the following standards for laser and LED safety.

IEC 60825-1 / EN 60825-1 - Class 1 LED Product

Barcode Scanner 2/2

Scanner connected