Preparation and removal, cont’d – Vortech 8-Rib Drive Upgrade for 2005-2009 Mustang GT User Manual

Page 8

P/N: 007084

15DEC08v1.1(007084v1.1)05MusMaxgrip

1. PREPARATION AND REMOVAL, cont’d

Fig. 1-f

Fig. 1-g

8mm HEADED BOLTS

COOLANT

OVERFLOW HOSE

TWO UPPER

RADIATOR HOSES

HOSE TO

THERMOSTAT

Locate the coolant drain plug on the passen-

ger side of the radiator. Next drain the cool-

ant into a clean container. This coolant will be

reused in a later step.

Non-Cooled Kits Only: Remove the two 8mm

headed bolts securing the coolant overflow

reservoir to the plastic fan shroud. (See Fig.

1-f.)

K. Disconnect the small overflow hose (running

across the top of the radiator) from the over-

flow reservoir. (See Fig. 1-f.)

Remove the large hose connecting the ther-

mostat hose to the bottom of the overflow

reservoir and set aside to be re-installed in a

later step.