Notices, Important, Read before installation is started) – Vortech 8-Rib Drive Upgrade for 2005-2009 Mustang GT User Manual

Page 4

P/N: 007084

15DEC08v1.1(007084v1.1)05MusMaxgrip

This product may not be legal for use on public roads in all 50 states.

NOTICES

(Read before installation is started)

Included in this kit is a smaller than originally supplied supercharger pulley. This new

pulley is recommended to achieve the best performance results. Removal of the factory

sealed pulley will reduce the supercharger warranty from three years to one year unless

the supercharger unit (with the original pulley still attached) and new pulley are sent into

Vortech for removal, installation and re-sealing. If the supercharger warranty is not a

concern or if the supercharger warranty has expired, the pulley may simply be removed

and replaced with the new part supplied. Hammering/prying etc. on the supercharger

and/or pulley will cause damage to the parts. Light heating of the supercharger pulley

with a propane torch (if the pulley is tight on the shaft) will aid removal. A return authori-

zation number is required before the supercharger and pulley are sent into Vortech. Call

the Vortech service department at (805) 247-0226 for a return authorization number.

Return freight (ground) will be paid by Vortech.

This product is protected by state common law, copyright and/or patent. All legal rights

therein are reserved. The design, layout, dimensions, geometry, and engineering features

shown in this product are the exclusive property of Vortech Engineering, LLC/Paxton

Automotive. This product may not be copied or duplicated in whole or part, abstractly or

fundamentally, intentionally or fortuitously, nor shall any design, dimension, or other infor-

mation be incorporated into any product or apparatus without prior written consent of

Vortech Engineering, LLC/Paxton Automotive.

• Proper installation of supplied alternator pulley requires an OEM alternator pulley

removal tool. This part may be purchased from Saleen, P/N: 00-3105-C11576.

• Custom ECM programming and fuel / ignition system upgrades will be required when

changing the supercharger drive pulley to any size other than what was originally

supplied in the complete supercharger kit.

• Supercharger pulley removal may reduce or void the supercharger unit warranty.
• Pulley Diameter Changes: Careful size selection is mandatory for proper engine and

supercharger longevity. Contact the applicable Vortech and Paxton tech line for assis-

tance with impeller speed calculations if necessary.

• A Vortech Maxflow Race or Mondo compressor bypass valve is required for applica-

tions producing more than 11-12 psig.

IMPORTANT