Vortech 8-Rib Drive Upgrade for 2005-2009 Mustang GT - Manual (Page 10)

P/N: 007084
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
15DEC08v1.1(007084v1.1)05MusMaxgrip
4
Fig. 2-c
3. Install the supplied 8-rib alternator
pulley (4FU016-021) and secure
using the M16 x 1.50" flanged nut
provided.
E. Remove the two stud bolts that retain
the factory idlers to the front cover.
Discard the idlers and stud bolts.
Replace the top idler with the 3.5"
smooth idler (4FU016-021) and stud bolt
provided. Replace the lower idler with
the 3.5" ribbed idler (4FU016-041) and
stud bolt provided. (See Fig. 2-c.)
F. Using the appropriate pulley puller,
remove the factory power steering pulley
and discard. Replace with the supplied
8-rib power steering pulley with the
appropriate installer tool.
G. Remove the A/C clutch retaining screws.
Carefully remove the clutch and set
aside with the hardware and spacer,
noting the order removed. Replace with
the supplied 8-rib A/C pulley (4FR016-
021), and secure using the factory hard-
ware and spacer.
H. Remove the crank pulley retaining bolt.
Using the appropriate pulley puller,
remove the crank pulley and discard.
Install the supplied 8-rib crank pulley
using the factory retaining bolt. (Thread
locking compound must be applied to
the screw threads.)
I. Loosely install the 8-rib drive belt provid-
ed using Fig. 2-c for belt route refer-
ence. Not all pulleys are installed at this
time.
2. PULLEy AND SPACER REPLACEMENT, cont’d